A leaky tap is one of the most common household problems, but it's also one of the easiest to fix yourself. This guide will walk you through the process step by step.

Tools You'll Need

• Adjustable spanner
• Flathead and Phillips screwdrivers
• Replacement washer or O-ring
• Plumber's tape
• Rag or cloth

Step-by-Step Instructions

1. Turn off the water supply at the isolation valve
2. Remove the tap handle by unscrewing it
3. Remove the tap bonnet to access the washer
4. Replace the old washer with a new one
5. Reassemble the tap in reverse order
6. Turn the water supply back on and test

Common Issues and Solutions

Dripping from spout: Usually a worn washer or O-ring

Leaking from base: May need new O-ring or plumber's tape

Hard to turn: Clean and lubricate the mechanism

Remember to always turn off the water supply before starting any plumbing work!